Seminars 2024

• March 21, 2024
  Cédric Laurent (Université de Lorraine)
  Defining a scaffold for anterior cruciate ligament: What has been done, and what still needs to be done?   

• March 14, 2024
  Filippo Gatti (Centrale Supélec)
  Generative strategies to empower physics-based wave propagation with deep learning. Applications to earthquake engineering and structural health monitoring.   

• March 7, 2024
  Corrado Maurini (Sorbonne Université)
  Crack nucleation in variational phase-field models of brittle fracture: the case of almost incompressible materials   

• February 29, 2024
  Olga Fink (Ecole Polytechnique Fédérale de Lausanne)
  Fusing physics-based and deep learning algorithms for fault diagnostics and prognostics   

• February 1, 2024
  Mary Boyce (Columbia University)
  Mechanics of Soft Composites : The Interplay between Geometrical Structuring and Large Deformation to Achieve Novel Behavior   

• January 25, 2024
  Nicolas Auffray (Sorbonne Université)
  Anisotropic elasticity threshold function : the benefit of group theory   

• January 18, 2024
  Alexandra Houssaye (Muséum National d’Histoire Naturelle)
  From the functional study of bone structures on an evolutionary scale to bioinspiration   

• January 11, 2024
  Sylvain Patinet (ESPCI Paris)
  Modelling Plastic Deformation in Amorphous Solids   

Seminars 2023

• December 14, 2023
  Dennis Kochmann(ETH Zurich)
  Predicting and optimizing wave motion in spatially graded structures   

• December 7, 2023
  Aurélien Doitrand (INSA Lyon)
  Crack nucleation assessment by the coupled criterion   

• November 23, 2023
  Ernesto Di Maio (University of Naples Federico II)
  Graded foams by time dependent boundary conditions in blowing agent sorption   

• November 9, 2023
  Pedro Ponte Castañeda (University of Pennsylvania)
  Nonlinear Homogenization and Applications to Composites and Polycrystals   

• October 6, 2023
  Laurine Choisez (Université Catholique de Louvain)
  The use of iron powder as sustainable fuel   

• September 28, 2023
  Martin Genet (Ecole polytechnique)
  Mechanically Consistent Regularization for Large Motion Tracking   

• September 22, 2023
  Vincent Taupin (Université de Lorraine)
  Field Dislocation Mechanics and its application to electron microscopy   

• June 15, 2023
  Laura De Lorenzis (ETH Zurich)
  Automated discovery of generalized standard material models   

• June 8, 2023
  Nikolaos Karathanasopoulos (New York University, Abu Dhabi campus & Tandon School of Engineering)
  Highly strain rate sensitive and ductile composite materials combining soft with stiff polymer-based interpenetrating phases   

• June 1, 2023
  François Willot (Ecole des Mines de Paris)
  Homogenized metrics in multiscale random sets and applications to plasticity   

• May 25, 2023
  Natasha VERMAAK (Lehigh University)
  On the shakedown response of an auxetic structure   

• May 11, 2023
  Fabrice Pierron (University of Southampton)
  New high strain rate mechanical tests of materials based on ultra-high speed imaging   

• April 20, 2023
  Vikram S. Deshpande (Cambridge University)
  Anomalous toughness of elastic micro-architected solids   

• April 6, 2023
  Patrizio Lomonaco (LMS, Ecole polytechnique)
  Study of electrically conductive coatings produced by cold spray onto brittle and thermosensitive substrates   

• March 23, 2023
  Alexander Yarin (University of Illinois at Chicago)
  Electrohydrodynamics in Additive Manufacturing, Coating and Painting: Experiments and Theory   

• March 16, 2023
  Daniel Garcia-Gonzalez (Universidad Carlos III de Madrid)
  Ultra-soft magneto-responsive materials to open new avenues in mechanobiology   

• March 9, 2023
  Pierre KERFRIDEN (Mines Paris)
  Fusion of Finite Element Methods and Deep Learning algorithms : some recent developments   

• February 16,2023
  Simon Le Floc’h (Université Montpellier 2)
  Experimental findings and the beginning of explanations by modelling of particular Poisson effects encountered during traction of samples of the annulus fibrosus.   

• February 9, 2023
  Sid Kumar(TU Delft)
  EUCLID: Learning constitutive models without stress data   

• January 26, 2023
  Nicolas MOËS (Ecole Centrale de Nantes Institut Universitaire de France)
  A new paradigm for the simulation of front propagation in mechanics and physics: X-MESH   

• January 19, 2023
  Federica Daghia(ENS Paris-Saclay)
  Towards a micro-macro link for interface cracks   

• January 5, 2023
  Marcelo Dias (University of Edinburgh)
  Instabilities in kirigami structures   

Seminars 2022

• December 15, 2022
  Franck J. Vernerey (University of Colorado Boulder)
  Mechanical adaptation and morphogenesis of fire ant swarms : From simple interactions to emerging complexity   

• December 8, 2022
  Vidit Gaur (Indian Institute of Technology Roorkee)
  Micro-mechanical modelling of fatigue in aluminium alloys and their weld joints   

• November 24, 2022
  Döme Tanguy (Université Claude Bernard Lyon 1)
  Hydrogen embrittlement of metallic alloys: atomistic simulations and microtensile experiments   

• November 10, 2022
  Milad Hamidi Nasab (Ecole Polytechnique Fédérale de Lausanne)
  Operando synchrotron Laser Powder bed Fusion (LPBF) for the development of in-situ monitoring techniques and understanding of microstructural phenomena   

• October 20, 2022
  Guillaume Couegnat(LCTS, Université de Bordeaux)
  Image-based modeling of carbon-carbon and ceramic-matrix composites: from X-ray microtomographies to finite element models   

• October 13, 2022
  Pradeep R. Guduru (School of Engineering, Brown University)
  On the Interaction between Mechanics and Chemistry in Electrochemical Systems   

• October 6, 2022
  Ferdinando Auricchio Universita Di Pavia, Italy)
  Additive manufacturing: design, simulations, and challenges   

• June 17, 2022
  Barbara Wohlmuth (Professor of Numerical Analysis, Department of Mathematics, Technical University of Munich)
  Computational Methods in Mechanics   

• June 9, 2022
  Norman Fleck (University of Cambridge)
  The failure of adhesive joints: mechanisms ranging from ductile fracture to corrosion by diffusion-controlled growth   

• June 2, 2022
  Hans van Dommelen (TU Eindhoven)
  Micromechanics of oriented polymers: from structure to anisotropy   

• May 19, 2022
  Wolfgang Pantleon (Technical University of Denmark)
  Monitoring microstructural evolution in-situ during cyclic loading with high-resolution reciprocal space mapping   

• May 12, 2022
  Vignesh Kannan (ETH Zurich)
  Rate-dependent material response and defect kinetics : from material strength at the extremes to multi-physics   

• May 5, 2022
  Thomas Heuzé (Centrale Nantes)
  Numerical homogenization and model reduction for transient diffusion and coupled mechanics problems   

• May 5, 2022
  Qiang Du (Columbia University)
  Nonlocal modeling, analysis and computation : some recent development   
  

• April 7, 2022
  Stavros Gaitanaros (Johns Hopkins University)
  Strength and Toughness of Lattice Metamaterials    

• March 31, 2022
  Charles-André Gandin (MINES ParisTech CEMEF, Sophia Antipolis)
  Modeling of additive manufacturing at multiple scales   

• March 24, 2022
  Marie E. Rognes (Simula Research Laboratory, Oslo, Norway)
  Mathematical modelling of human brain transport From medical images to biophysical simulation   

• March 17, 2022
  Isabelle Cantat (Université de Rennes)
  Visco-elasto-plasticity of dry liquid foams   

• March 10, 2022
  Eric Martin (Bordeaux INP, Université de Bordeaux)
  Prediction of interfacial debonding with the coupled criterion   

Seminars 2021

• May 6, 2021
  Dr. Benoit Roman (PMMH, ESPCI Paris, France)
  Continuum and discrete views on the mechanics of fibre network materials
  
  
• April 15, 2021
  Dr. Alexander E. Ehret (EMPA, ETH Zurich, Switzerland)
  Continuum and discrete views on the mechanics of fibre network materials
  
  
• April 8, 2021
  Prof. Jocelyn Etienne (Université de Grenoble Alpes, France)
  The mechanics of actomyosin and tissue morphogenesis
  
  
• March 18, 2021
  Prof. Laurence Brassart (University of Oxford, UK)
  Micromechanics of near-ideal polymer networks
  
  
• March 11, 2021
  Dr. Lucas Frerot (Johns Hopkins University, USA)
  Roles of Roughness in Tribology
  
  
• March 4, 2021
  Prof. Marino Arroyo (Universitat Politècnica de Catalunya, Spain)
  The hierarchical mechanics of cells and tissues: deformation, adhesion and fracture
  
  
• February 11, 2021
  Prof. Arnaud Lazarus (Sorbonne Université, France)
  Periodically varying systems: Beyond the tip of the parametric instability tongues
  
  
• February 4, 2021
  Prof. Stéphane Avril (Mines Saint-Etienne, France)
  Coupling continuum mechanics and biology to assist clinicians in the management of aortic aneurysms
  
  
• January 28, 2021
  Prof. Johan Gaume (EPFL, Switzerland)
  From sub-Rayleigh to supershear fracture in snow slab avalanche release
  
  
• January 21, 2021
  Prof. Dennis Kochmann (ETH Zurich, Switzerland)
  Spinodoids – cellular architectures with intriguing properties
  
  
• January 7, 2021
  Prof. Gerard Ateshian (Columbia University, USA)
  Thermodynamics of Constrained Reactive Mixtures
  
  

Seminars 2020

• December 17, 2020
  Prof. Fengwen Wang (Danmarks Tekniske Universitet, Denmark)
  Architected materials using topology optimization
  
  
• December 10, 2020
  Prof. Arthur Lebée (Ecole des Ponts ParisTech, France)
  Continuum elasticity of Miura Tessellations
  
  
• December 3, 2020
  Prof. Erik Burman (University College of London, UK)
  Augmented Lagrangian methods for finite element methods in computational mechanics
  
  
• November 30, 2020
  Prof. Florian Bouville (Imperial College London, UK)
  The role of interface on the mechanical properties of nacre inspired composites
  
  
• November 26, 2020
  Prof. Jean-François Molinari (EPFL, Switzerland)
  Toward a mechanistic understanding of adhesive wear
  
  
• November 19, 2020
  Dr. Juan Guillermo Santos Macias (UCLouvain, Belgium)
  Post-treatment of LPBF AlSi10Mg for fatigue resistance enhancement
  
  
• November 16, 2020
  Symposium Impression 3D polymères
  
  
• November 12, 2020
  Prof. Charles Mareau (Arts et Métiers ParisTech, Angers, France)
  Micromechanical modeling of fatigue damage in metallic polycrystals
  
  
• October 22, 2020
  Dr. Daniel Garcia-Gonzalez (Universidad Carlos III de Madrid, Spain)
  Stimuli responsive mechanical systems: from biological cells to magneto-active hydrogels
  
  
• October 19, 2020
  Dr. Emmanuel Siéfert (Hebrew University of Jerusalem, Israel)
  Inflating to shape: from soft architectured elastomers to patterned fabric sheets
  
  
• October 15, 2020
  Prof. Jérémy Bleyer (École des Ponts ParisTech, France)
  Multiphase continua for fiber-reinforced materials
  
  
• September 24, 2020
  Prof. Rafael Estevez (Université de Grenoble Alpes, France)
  Crossed looks at (brittle) fracture descriptions: gaining insight from models confrontations and comparisons with experiments on PMMA
  
  
• June 25, 2020
  Prof. Paolo Celli (Stony Brook University, USA)
  From patterned sheets to functional morphing structures
  
  
• June 18, 2020
  Prof. Alexander Freidin (Peter the Great Saint Petersburg University, Russia)
  Chemical affinity tensor in mechanochemistry
  
  
• June 11, 2020
  Prof. John Willis (University of Cambridge, UK)
  Transmission and reflection at the boundary of a random two-component composite
  
  
• June 4, 2020
  Prof. Tobias Schneider (EPFL, Switzerland)
  From patterns in turbulence to the buckling of shells - the role of unstable invariant solutions in nonlinear mechanics
  
  
• May 28, 2020
  Prof. Samantha Daly (University of California, Santa Barbara, USA)
  Machine Learning and Computer Vision for Processing-Property Analyses
  
  
• May 20, 2020
  Dr. Eric Maire (INSA Lyon, France)
  In situ experiments in x-ray tomography: exploring the interior of ordinary materials to improve their mechanical analysis
  
  
• May 14, 2020
  Prof. Thomas Pardoen (UCLouvain, Belgium)
  Micromechanics of deformation and fracture in highly cross-linked thermosets - impact on composite modelling
  
  
• May 7, 2020
  Prof. Michele Chiumenti (CIMNE — Universitat Politècnica de Catalunya, Spain)
  Developments in Additive Manufacturing Processes: Industrial Technologies and Numerical Analyses
  
  
• April 30, 2020
  Dr. Eric A. Jägle (Bundeswehr University — Max Planck Institute for Iron Research, Germany)
  Controlling phase transformations during laser AM - the intrinsic heat treatment effect and beyond
  
  
• April 23, 2020
  Prof. Hussein Nassar (University of Missouri–Columbia, USA)
  Cloaking, and other fantastic beasts, in trusses with mechanisms
  
  
• March 26, 2020
  Dr. Elizaveta Gordeliy (École polytechnique, France)
  Modeling hydraulic fracture propagation using XFEM
  
  

About LMS

Follow us

	Calendar
	Send an email to lms.seminaires@gmail.com with the text "Subscription to the LMS seminar mailing list"
	Twitter : @LmsSeminars
	YouTube channel : LMSSeminars